Borosilicate Foam Glass Brick    Borosilicate foam glass bricks are inorganic closed-cell insulation materials made primarily from borosilicate glass, crushed and mixed with additives and foaming agents, then produced through high-temperature foaming and cooling processes. This material features superior impermeability and waterproof performance, with good acid resistance (except for hydrofluoric acid). Borosilicate foam glass bricks, adhesives, and primers together form a reliable corrosion protection system for chimney interiors, providing excellent thermal insulation, waterproofing, and corrosion resistance.1. Application Range     Chimneys and flues after flue gas desulfurization in coal-fired power plants. The corrosion protection system is applicable to substrates such as metals, concrete, refractory bricks, and FRP; it can also be used for cryogenic equipment and pipeline insulation.2. Product Characteristics      ★L(fēng)ightweight, low thermal conductivity, high compressive strength;   ★Waterproof, non-hygroscopic, and leak-proof;   ★Inorganic materials, non-aging, non-combustible, non-moldy, corrosion-resistant, with long service life;   ★Suitable for various harsh environments such as high temperatures and deep freezes;   ★Stable physical and chemical properties with dimensional stability, easy to cut;   ★Very low thermal expansion coefficient, capable of withstanding a wide range of high and low temperature shocks..3. Physical Performance Indicators4 . Packaging and Storage    ★Products are packaged in cartons for easy transport, installation, and identification.    ★ During transportation, materials must be kept clean.    ★Packaging boxes must have the manufacturer's name, product specifications, product name, transportation, storage safety, precautions, etc. printed on the external wall.    ★Each panel and layer should be separated by cardboard.    ★Storage must be waterproof, stacked no higher than 6 layers.5. Validity Period     Indefinite

Foam Glass Plates / Pipe Shells     Foam glass is an inorganic thermal insulation material with a large number of uniform, independent and closed pore structures. It is mainly made from formulated glass particles melted in a melting furnace, mixed with an appropriate amount of foaming agents and other additives, heated and melted in a natural gas roller kiln and then cooled in an annealing furnace. It completely retains the chemical stability of inorganic glass. It features low bulk density, low thermal conductivity, being impermeable to moisture, non-absorbent, non-combustible, non-mildewable, resistant to rodents, having high mechanical strength and being easy to process. It can withstand all chemical corrosion except that of hydrogen fluoride and is known as a green and environmentally friendly thermal insulation material. The annual output of foam glass is 40,000 cubic meters.1.Product Standard: ASTM C552 - 20212.Main Technical Indicators3.Packaging and Storage?  Packed in carton boxes;?  When loading onto vehicles, stack them tightly to prevent tilting;? Store in a dry and ventilated environment and avoid getting wet by rain;?  The stacking height should not exceed five layers.4.Precautions?  Foam glass is fragile. Handle it with care during transportation and handling;?  When insulating equipment or pipelines, use auxiliary materials such as mastic, sealant and fiberglass mesh cloth for sealing, moisture-proofing and fixing;?  It can be cut with tools during the installation process.

Flame Retardant MasticMastic is made from rubber, asphalt, rubber, minerals, and other fillers, with the addition of appropriate flame retardants. It has excellent airtightness, waterproofing, anti-freezing, anti-corrosion properties, resistance to aging and cracking, and can be applied at low temperatures. Once dry, it exhibits flame retardant properties.  1. Product Standard:  GB 50264-20132. Main Technical Specifications3. Packaging and Storage?  Packaged in barrels, 25kg/barrel;?  Store in a dark, room-temperature environment.4. Precautions?  Handle with care during transportation to avoid packaging damage;?  Store in a cool place, avoid direct sunlight;?  Ensure proper ventilation at the construction site;?  Reseal any remaining mastic for storage after use.5. Recommended Usage:  6~8kg/㎡;

SealantLow-temperature sealant is a low-solvent, flexible, thick paste mainly composed of organic polymer resin. It is a flexible material that provides excellent sealing performance for low-temperature insulation.1. Product Standards:GB 50264-20132. Main Technical Indicators      3.Packaging and Storage ? Packed in buckets, 20kg per bucket;? Store in a dark, room-temperature environment. 4. Notes? Handle with care during transportation to avoid damage to the packaging;? Application: Apply with a spatula to the sealing surface of insulation materials.?  Under high ambient temperatures or after long-term sealed storage, a thin dry film may form on the surface after opening. This is normal. Remove the film and continue using the product without affecting its performance;? Ensure proper ventilation at the construction site.

Abrasion-Resistant AgentThe abrasion-resistant agent is a solvent-based, gray-white flexible thick paste. It is mainly applied between foam glass and the substrate to prevent frictional damage to the foam glass insulation layer.1. Product Standards:GB 50264-20132. Main Technical Indicators 3. Packaging and Storage ? Packed in buckets, 20kg per bucket;? Use the product within 24 hours after opening. If unable to finish, seal the remaining product for storage;? Store in a dark, room-temperature environment.4. Notes? Application: Brush or spray;? Precipitation may occur during static storage, which is normal. Stir well before use to ensure no impact on performance.

Polurethane Adhesive   Polyurethane adhesive is an elastomeric anti-corrosion material developed specifically for the inner lining of coal-fired chimneys, sewage treatment tanks, chemical processing tanks, etc. It features good adhesion, high elasticity, and resistance to penetration, capable of withstanding strong corrosive acidic liquids at both normal and high temperatures. It is widely used for the internal anti-corrosion of coal-fired chimney interiors, sewage treatment plants, chemical plants, power plants, etc.1. Product Characteristics    ★Two-component, cures at room temperature;   ★Good adhesion with substrates;   ★Good elasticity, less prone to stress failure;   ★Can withstand strong acid solutions for extended periods;   ★Usable below 150℃ for long periods, with short-term tolerance for temperatures above 150℃;   ★No harmful gas emissions, safe for humans and non-polluting to the environment. 2. Main Uses    Anti-corrosion for coal-fired chimney interiors, sewage treatment plants, chemical factories, etc.3. Product Indicators (Not to be used as product standards) 4. Color   Component A is black, Component B is light yellow, and mixed it appears black.5. Packaging   Component A is packaged in white plastic barrels, 20kg/barrel; Component B is packaged in plastic bottles, 1.0kg/barrel.    Quality ratio: A:B = 20:16. Usage Conditions   ★When cleaning porous substrates, grinding is required based on their characteristics.   ★After grinding, a lot of dust remains on the substrate surface, which should be cleaned with a brush or broom. Then rinse with high-pressure water and allow to air dry or heat dry to avoid dust adhering to the surface again;   ★The cleaned surface should not be subjected to any form of pollution before applying adhesive; if the surface is left unused for an extended period after cleaning, it must be re-cleaned before construction. ★The substrate surface must be solid, flat, clean, and dry, with no powdering, sand, hollowing, or flaking. 7. Storage and Validity Period    Stored at a cool, dry place, in unopened sealed containers, before use, with a shelf life of 12 months from production date. Please check the production date on the product packaging.8. Precautions★ Not suitable for frosted or damp substrate surfaces;★ Construction is not advisable when material surface temperature is below 0℃ or above 50℃;★ Components A and B must be thoroughly mixed to avoid unevenness that could affect the performance of the elastic material;★ Components A and B should be stored separately and used as mixed, and to avoid waste, mix only when needed;★ For adhesion related construction, check adhesion performance beforehand and contact relevant technical service departments if needed;★ Direct contact with eyes and skin may cause temporary discomfort; in such situations, rinse with plenty of water and seek medical attention if necessary.

Rigid Polyurethane Foam (PUR)PUR is a foaming material produced by the reaction of isocyanate with polyether in the presence of a catalyst. Its physical and fire resistance is superior to that of general polyurethane, making it an ideal organic low-temperature insulation material with low thermal conductivity, lightweight, vibration resistance, and strong adaptability. It is widely used in refineries, chemical plants, ethylene, fertilizers, cold storage, and building insulation.1. Product Standard：GB/T 25997-20202. Main Technical Indicators3. Packaging and Storage?  Bucket packaging, 20kg/bucket;Ensure that the site is ventilated;Store in the original unopened sealed container.Valid shelf life 12 months. Check the product packaging for the production date.4. PrecautionsDo not use on frosty or damp substrate surfaces.Construction is not advisable when material surface temperature is below 0℃ or above 50℃;Components A and B must be thoroughly mixed to avoid unevenness that could affect the performance of the elastic material;Components A and B should be stored separately and used as mixed, to avoid waste, mix only when needed;For adhesion-related construction, check adhesion performance beforehand and contact relevant technical service departments if needed;Direct contact with eyes and skin may cause temporary discomfort; in such situations, rinse with plenty of water and seek medical attention if necessary.

Polyisocyanurate Foam (PIR)PIR is a foam material made from the reaction between isocyanate and polyether under catalysis. Its physical and fire-resistant properties are superior to those of regular polyurethane. It is an ideal organic low-temperature thermal insulation material with a low thermal conductivity, lightweight, shock-absorbing, and adaptable. It is widely used in refineries, chemical plants, ethylene production, fertilizer plants, cold storage, and the construction industry for insulation and thermal protection.1. Product Standards:GB/T 25997-20202. Main Technical Indicators3. Packaging and Storage ? Bundled packaging;? When loading, ensure the products are packed tightly to avoid impact;?  Store in a waterproof, moisture-proof, light-proof, dry, and well-ventilated area;?  Keep away from heat sources, and avoid direct sunlight.4. Notes? Handle with care during transportation and handling; ? When insulating equipment or pipelines, use additional materials such as mastics, sealants, and mesh cloth for sealing, moisture-proofing, and fixing; ? During installation, tools can be used for cutting.